Install the Serial ATA hard disks into the drive bays. Checking Jumper Settings The following illustration shows the location of the motherboard jumpers. Table of Contents Add to my manuals Add. Power off and Check the Failed Drive: Ensure that the edge connector is correctly seated in the slot. Feature Feature Processor The motherboard uses a pin socket that carries the following features:
|Date Added:||12 November 2011|
|File Size:||9.70 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Install the Serial ATA hard disks into the drive bays.
Ecs KM400-M2 Manual
An item installation screen appears: Installing a Floppy Diskette Drive The motherboard has a floppy diskette drive FDD1 interface and ships with a diskette drive ribbon cable that supports one or two floppy diskette drives.
Expansion Options The motherboard comes with the following expansion options: Jumpers with more than one staa are numbered.
Installing Add-on Cards Installing Add-on Cards The km040-m2 on this motherboard are designed to hold expansion cards and connect them to the system bus. Click on these toolbar buttons to execute their specific functions.
ECS KMM2 – – motherboard – micro ATX – Socket A – KM Overview – CNET
Feature Feature Processor The motherboard uses a pin socket that carries the following features: Table of Contents Add to my manuals Add. Below you can find a brief description of each software program, and the location for your motherboard version. Page 12 Memo Introducing the Motherboard Installing Memory Modules This motherboard accommodates two pin 2. Don’t show me satw message again.
Page 43 Power Management Option User Define This item acts like a master switch for the power-saving modes and hard disk timeouts. Got it, continue to print.
Connecting Case Components Connecting Case Components After you have installed the motherboard into a case, you can begin con- necting the motherboard components.
We recommend that you leave this item at the default value. Look for the chipset and motherboard model; then browse to the directory and path to begin installing the drivers. Checking Jumper Settings Checking Jumper Settings The following illustration shows the location of the motherboard jumpers.
This motherboard has a Socket socket. Checking Jumper Settings The following illustration shows the location of the motherboard jumpers. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author.
KMM2 V ECS ELITEGROUP Motherboard Mainboard Drivers Manuals BIOS
But maintains register compatibility and software compatibility with Parallel ATA. Follow the instructions on the screen to install the items. Preface Copyright This publication, km400-m2 all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. The following screen appears: The CD will auto-run and the setup screen will appear.
Feature Processor The motherboard uses a pin socket that carries the following features: The InstallShield Wizard will begin automatically for installation. Install the edge connector of the add-on card into the expansion slot.
EliteGroup Computer Systems KM400-M2, Socket A, AMD (KM400-M2-3.0) Motherboard
After replacing the hard drive, boot into BIOS and select Choose replacement drive and rebuild to rebuild the broken array. If you are setting up a new hard disk drive that supports LBA mode, more than one line km400-m22 appear in the parameter box.
Checking Jumper Settings This section explains how to set jumpers for correct configuration of the motherboard.
The default options are recommended. Advanced Chipset Features These items define critical timing parameters of the motherboard. Setup Tab Setup Click the Setup sxta to run the software installation program.